CN
Home　>　Battery adhesive　>　Special adhesive for alkaline batteries
Battery adhesive

Model: JDM eries adhesives

Use: Applied to the inner wall of the battery case opening to enhance sealing.

1.Environment - friendly product: non - hazardous, paste - like, with a volatile content of less than 8%, meeting the latest VOC standards.

2.Good sealing performance, no flowing at high temperatures and no hardening at low temperatures.

3.Suitable for coating systems with heat - preservation functions.

4.The main performance is superior to that of similar imported products.

Consulting procurement Customized requirements
Product Introduction

The JDM series alkaline battery sealing adhesive is one of the alkaline battery sealant products of our company, and it is mainly used for sealing alkaline batteries. This product is prepared by our company through scientific proportioning and repeated tests with high-end raw materials. Compared with similar products, its main performance has certain advantages.

Product characteristics

  • Environmentally friendly and pollution-free

    This product is safe and pollution-free. It can pass certifications such as REACH and ROHS. There is no hidden danger of flammability or explosiveness, and it has no impact on the production environment or the health of workers.

  • It has good sealing performance at high temperatures

    This product has good sealing performance both at room temperature and high temperature, and it can meet the special requirements of high-end products.

  • Wide range of uses

    It is suitable for use in gluing equipment with heat preservation systems. The process is simple and it is convenient to use.

  • packaging

    It adopts 20L chemical iron drums for loading. The net weight of the product is 15KG per drum.

  • Storage conditions

    Store in a cool, well-ventilated and dry place. Avoid sunlight and keep away from fire sources and heat sources.

Physical Properties
Specification Physical Properties Remarks
Appearance Brown - black homogeneous paste
State Single-component paste
Sealing performance（25±3℃ Mpa） ≥7.0MPa
Notes

1. The product's operating temperature should not exceed 70℃.
2. No additional substances are required during the use of this sealant.
3. Seal the packaging barrel after taking the sealant to prevent impurities from entering.
4. This paste - like sealant has thixotropy. It thickens gradually when stationary but remains usable within the shelf - life. If it becomes too thick for application after long - term storage, stir it to improve fluidity for smooth extrusion.
5. Customers are advised to conduct comprehensive tests on process and performance according to their specific usage and product requirements before initial use to select the suitable sealant model.

WeChat Account

Service Contact
+86-755-27165247
Address: No. 6, Qilu 7, Yangyong Industrial Zone, Shapu Community, Songgang Subdistrict, Bao'an District, Shenzhen City
Copyright © 2024 深圳市天宁达胶粘技术有限公司. 粤ICP备17090574号