• 

  Good alkali resistance

  It has excellent alkali resistance and sealing performance against alkali solution at room temperature and high temperature. In the battery storage and transportation and charging and discharging process, even at a high temperature of 80℃, the alkali liquid will not penetrate the adhesive layer, and it has a good sealing effect on 40% KOH solution.

• 

  Good alkaline-repellent properties

  Good alkali repellent. After drying, the glue will form alkali resistant protective layer, alkali drip does not diffuse, long-term staining of alkali will not penetrate and climb alkali.

• 

  Variety and ease of use

  There are a number of models to choose from, can meet the various process requirements of different customers, there are good viscoelasticity after drying, there are also dry non-stick. All kinds of glue do not need to be diluted, easy to use.

• 

  Packaging

  It adopts 20L chemical iron drums for loading. The net weight of the product is 20L per drum.

• 

  Storage conditions

  Store in a cool, well-ventilated and dry place. Avoid sunlight and keep away from fire sources and heat sources.

1. this product are volatile and flammable, require construction sites well ventilated, bubble sealing ring and drying process can not be carried out in a closed workshop.

2. The remaining glue should be covered tightly and stored in a sealed place to prevent the solvent from volatilizing, and it is forbidden to mix with water, dust and other impurities. It is strictly prohibited to mix water, dust and other impurities. 

3. the solvent evaporation rate of this product is greatly affected by the temperature and humidity, when the temperature is lower than 13 ℃ or humidity is higher than 85%, it should be air-dried. When the temperature is lower than 13 ℃ or humidity is higher than 85% should be taken to air dry.

4. Under normal circumstances, no dilution. Can not be added to benzene, such as water and other solvents to dilute, special circumstances do need to use our company specified special diluent, so as not to affect product performance or other chemical reactions. 

5. in the operation process if the skin is accidentally stained with glue, please immediately rinse with water, and wash with soap, if accidentally splashed into the eyes need to use a lot of water to rinse, still feel uncomfortable, please consult a doctor in time.